Verified dealer
View details
METKON ECOPRESS 52 | 102 | 202 Embedding press Hot embedding press
New machineVerified seller
Request price
Directly to the seller
1 / 7
Technical data
· ID 80869166Used machinery
- Condition
- New machine
- Year of manufacture
- 2024
- Location
- 40764 Langenfeld
Identifikation
ManufacturerMETKON
ModelECOPRESS 52 | 102 | 202
Item number01MET ECOPRESS 102 202 Resale
Technik
Quantity1
Description
Metallography Mounting presses ECOPRESS
All ECOPRESS presses can be programmed by the user in a simple manner, that the mounting process runs fully automatically.
When the ECOPRESS 50, one program can be stored in the control electronics. A rugged bayonet allows quick and safe operation. The ECOPRESS series offers a wide variety of different size of molds of 25 - 50 mm in diameter. At the same time two samples can be embedded per cylinder with an intermediate piston.
Alternatively, machine type of ECOPRESS 200 twin-piston for up to at the same time 4 embeds is available.
When baked in the samples into plastic granules are melted, that the sample under heat and high pressure wraps pore-free and then through a press cylinder, electronic control, integrated cooling for solidifying.
ECOPRESS 50 one cylinder, electronic control, full automatic program
ECOPRESS 100 one pressing cylinder, programmable with SIEMENS plc, 25 programs of memory
ECOPRESS 200 two pressing cylinders, programmable with SIEMENS plc, 25 investment programs
ECOPRESS 50 investment unit with easier control elcectronic - ECOPRESS 50 is the easiest embedding press of this maschinen seriea. This equipment works electrically powered with an integrated air hydraulic pressure system and requires only a 230V power supply, cooling water connection and connection for water drain. A circulating cooling system is optionally available.
The supplied pressure can be adjusted easily and quickly by means of a manual adjustment valve for a maximum pressure up to 300 bar. The maximum temperature of cylinder can be 200 ° C.
The integrated control system allows heating time up to 60 minutes. The thermostatically controlled heating and cooling times result in short cycle times. The maximum heating output is up to 1250W. At the end of the sequence of the mounting, the operator receives an acoustic note. Available diameter 25 | 30 | 40 | 50 mm (and imperial size).
Delivered ready for use (without embedding cylinder - must be ordered separately) and a test set of consumable materials includes comprising:
-5 x 1 kg (5 kg) various mounting grains
- materials release spray (400 ml)
power supply: 230V / 50 Hz, 1 Phase (110V / 60 Hz)
Qualität at fair price - new often cheaper than machines of the competitor
More Info:
schuetz-licht.de/produkte/metallografie/warmeinbettpressen/einbettpresse-ecopress-50/
All ECOPRESS presses can be programmed by the user in a simple manner, that the mounting process runs fully automatically.
When the ECOPRESS 50, one program can be stored in the control electronics. A rugged bayonet allows quick and safe operation. The ECOPRESS series offers a wide variety of different size of molds of 25 - 50 mm in diameter. At the same time two samples can be embedded per cylinder with an intermediate piston.
Alternatively, machine type of ECOPRESS 200 twin-piston for up to at the same time 4 embeds is available.
When baked in the samples into plastic granules are melted, that the sample under heat and high pressure wraps pore-free and then through a press cylinder, electronic control, integrated cooling for solidifying.
ECOPRESS 50 one cylinder, electronic control, full automatic program
ECOPRESS 100 one pressing cylinder, programmable with SIEMENS plc, 25 programs of memory
ECOPRESS 200 two pressing cylinders, programmable with SIEMENS plc, 25 investment programs
ECOPRESS 50 investment unit with easier control elcectronic - ECOPRESS 50 is the easiest embedding press of this maschinen seriea. This equipment works electrically powered with an integrated air hydraulic pressure system and requires only a 230V power supply, cooling water connection and connection for water drain. A circulating cooling system is optionally available.
The supplied pressure can be adjusted easily and quickly by means of a manual adjustment valve for a maximum pressure up to 300 bar. The maximum temperature of cylinder can be 200 ° C.
The integrated control system allows heating time up to 60 minutes. The thermostatically controlled heating and cooling times result in short cycle times. The maximum heating output is up to 1250W. At the end of the sequence of the mounting, the operator receives an acoustic note. Available diameter 25 | 30 | 40 | 50 mm (and imperial size).
Delivered ready for use (without embedding cylinder - must be ordered separately) and a test set of consumable materials includes comprising:
-5 x 1 kg (5 kg) various mounting grains
- materials release spray (400 ml)
power supply: 230V / 50 Hz, 1 Phase (110V / 60 Hz)
Qualität at fair price - new often cheaper than machines of the competitor
More Info:
schuetz-licht.de/produkte/metallografie/warmeinbettpressen/einbettpresse-ecopress-50/
Inquire about this machine
Your inquiry goes directly to the seller of this machine.
